Agilent Technologies N9360A, Programming Manual

Page: 96 / 180

5-50 N9360A Multi UE Tester W-CDMA Programming Manual
5
Programming Command Reference
This query command returns the set channel number of the RFCH
with integer. The range of the value is same as that of the
command parameter.
TESTs:MANual:RFCH:CHANnel <int 1>,<int 2>
TESTs:MANual:RFCH:CHANnel?
This command sets a Band and channel for RF (uplink) on the
[Stand-by] screen or in the Connection status. When RFCH is set
in the Connection status, handover will starts. (However, if the
value of RFCH is set to the same value as the one currently set,
handover will not start.)
<int 1>
is a Band and set to
1
at preset.
<int 2>
is a variable
(uplink channel number) and set to
9612
at preset. The allowable
ranges are as follows:
At start up of the Tester, the queries in
<int 1>
and
<int 2>
format are returned.
If the setting with
<int>
format is performed, the format of the
query changes to
<int>
format.
If the setting with
<int 1>
and
<int 2>
format is performed,
the format of the query returns to
<int 1>
and
<int 2>
format.
This query command returns the set Band and Channel number
of RFCH with integer. The range of the value is same as that of
the command parameter.
Table 5-2
RFCH Allowable range and Preset Value
Band Allowable Range Preset Value
1 9600 to 9900 9612
6 4150 to 4200, 812, 837 4162
Table 5-3
Band and RFCH Allowable Range
Band Allowable Range
1 9600 to 9900
6 4150 to 4200, 812, 837