Agilent Technologies N9360A, Programming Manual

Page: 52 / 180

5-6 N9360A Multi UE Tester W-CDMA Programming Manual
5
Programming Command Reference
MAN:STBY
= [Manual Test : Stand-by] Screen
MAN:SMS:
[Manual Test : Stand-by] SMS Screen
TXAN:STBY
= [TX Analyzer : Stand-by] Screen
RFG
= [Signal Generator] Screen
CONF
= [Configuration] Screen
CONF:COND
= [Configuration : Test Condition] Screen
CONF:SEQ
= [Configuration : Test Sequence] Screen
CONF:FILE
= [Configuration : File Management] Screen
ELSE
= The other screens
•
<int>
when the [Automatic Test : Stand-by] screen is
currently displayed, the Sequence number, 1 or 2 , is
displayed. When other screen is displayed, 0 is returned.
Top Menu Screen
DISPlay:INIT
This command selects the [Top Menu] screen for activating one
of the function modes.
System Configuration
DISPlay:CONFigure
This command selects the [Configuration] screen. The
parameters and controls on this screen set the fundamental
information for all function modes of the Tester.
Application Type
DISPlay:APPLication?
This command returns a type of current active application.
NOTE
Parameters of Serial Port, GP-IB and Ethernet are not programmable but
manually settable.