Agilent Technologies N9360A, Programming Manual

Page: 112 / 180

5-66 N9360A Multi UE Tester W-CDMA Programming Manual
5
Programming Command Reference
At start up of the Tester, the queries in
<int 1>
and
<int 2>
format are returned.
If the setting with
<int>
format is performed, the format of the
query changes to
<int>
format.
If the setting with
<int 1>
and
<int 2>
format is performed,
the format of the query returns to
<int 1>
and
<int 2>
format.
This query command returns the set Band and Frequency of
RFCH with real. The range of the value is same as that of the
command parameter.
Amplitude
TXANalyzer:AMPLitude <real>
TXANalyzer:AMPLitude?
This command sets the amplitude of output signal from the
Tester applied to the mobile phone under test in each Band. The
allowable range is from
-110.0
to
-20.0
(dBm) in
0.1
steps. At
preset, this is set to
-50.0
(dBm).
This query command returns the set amplitude of output signal
by real ranging from
-110.0
to
-20.0
(dBm).
Modulation
TXANalyzer:MODulation <<
IDLE|IDLE+DPCH(PN9)|IDLE+DPCH(PN15)| <<
IDLE+DPCH(PN9)+OCNS|IDLE+DPCH(PN15)+OCNS
TXANalyzer:MODulation?
This command defines a type of modulation. The parameter is
IDLE
,
IDLE+DPCH(PN9)
,
IDLE+DPCH(PN15)
,
IDLE+DPCH(PN9)+OCNS
, or
IDLE+DPCH(PN15)+OCNS
. At preset,
this is set to
IDLE
. This works with Modulation on the [Signal
Generator] screen.
IDLE
: Outputs CPICH, P-CCPCH, SCH, PICH and S-CCPCH.
IDLE+DPCH(PN9)
: Outputs
IDLE
(without S-CCPCH) and RMC
12.2kbps (PN9).
IDLE+DPCH(PN15)
: Outputs
IDLE
(without S-CCPCH) and RMC
12.2kbps(PN15).