Agilent Technologies N9360A, Programming Manual

Page: 64 / 180

5-18 N9360A Multi UE Tester W-CDMA Programming Manual
5
Programming Command Reference
This command specifies the amplitude (BS Level) of the Tester
for Bit Error Ratio (BER) test in each band set by the
Band
command described on page 16 . The allowable range is from
-110.0
to
-20.0
(dBm) in
0.1
steps. At preset, this is set to
-106.7
(dBm).
BER Frame
CONFigure:SEQuence:SENSitivity:FRAMe <int>
CONFigure:SEQuence:SENSitivity:FRAMe?
This command specifies the number of the frames for BER. The
allowable range is from
1
to
4100
(frames) in
1
step. At preset,
this is set to
10
.
FreqError BS Level
CONFigure:SEQuence:FRQbslevel <real>
CONFigure:SEQuence:FRQbslevel?
This command specifies the amplitude (BS Level) of the Tester
for frequency error test in each band set by the
Band command
described on page 16 . The allowable range is from
-110.0
to
-20.0
(dBm) in
0.1
steps. At preset, this is set to
-50.0
(dBm).
RF Signal Output Mode
CONFigure:SEQuence:RFOUtput AUTO|ON
CONFigure:SEQuence:RFOUtput?
This command specifies RF Output in Automatic Test. At preset,
this is set to
ON
. The parameter is
AUTO
or
ON
. At preset, this is
set to
ON
.
This query command returns the RF signal output setting with
string of
AUTO
or
ON
.
Wait before Paging
CONFigure:SEQuence:WaitBeforePaging <int>
CONFigure:SEQuence:WaitBeforePaging?