![Agilent Technologies N9360A Programming Manual Download Page 62](http://html1.mh-extra.com/html/agilent-technologies/n9360a/n9360a_programming-manual_2868711062.webp)
5-16
N9360A Multi UE Tester W-CDMA Programming Manual
5
Programming Command Reference
Command Reference for Configuration : Test Sequence Screen
The sequence commands are used to control the test flow, test
sequences of Automatic Test, and also to define whether to
execute the pass or fail tests at the specified RFCH. The query
commands return the settings of those controls and parameters.
Radio System
CONFigure:SEQuence:RFORmat W-CDMA|OFF
CONFigure:SEQuence:RFORmat?
This command selects a Radio System to be tested. The
parameter is
W-CDMA
or
OFF
. At preset, this is set to
W-CDMA
.
This query command returns the selected Radio System with
strings.
Sequence Number
CONFigure:SEQuence:NO 1|2
CONFigure:SEQuence:NO?
This command specifies a sequence number. The sequence
number specified here applies to the commands that relate to
sequence. At preset, this is set to
1
.
This query command returns the selected Sequence Number
with integer value of
1
or
2
.
Band
CONFigure:SEQuence:BAND <int>
CONFigure:SEQuence:BAND?
This command specifies the Band in order to set each BS Level
on each band. The parameter is
1
or
6
. At preset, this is set to
1
.
This command works on the same principle as
CONFigure:SEQuence:BSLEvel:BAND
.
This command will be eliminated in future. (This is remained
for convenience of existing users.)
CONFigure:SEQuence:BSLEvel:BAND <int>
CONFigure:SEQuence:BSLEvel:BAND?
Summary of Contents for N9360A
Page 1: ...Agilent Technologies Agilent N9360A Multi UE Tester W CDMA Programming Manual...
Page 4: ...1 4 N9360A Multi UE Tester W CDMA Programming Manual 1 THIS PAGE IS INTENTIONALLY LEFT BLANK...
Page 8: ...8 N9360A Multi UE Tester W CDMA Programming Manual THIS PAGE IS INTENTIONALLY LEFT BLANK...
Page 12: ...6 N9360A Multi UE Tester W CDMA Programming Manual THIS PAGE IS INTENTIONALLY LEFT BLANK...