Agilent Technologies N9360A, Programming Manual

Page: 139 / 180

Programming Command Summary
6
N9360A Multi UE Tester W-CDMA Programming Manual 6-15
Measuring Screens
The following commands are used to set the controls and
parameters associated with the [Measuring] screen.
Test Result
The following query commands return a set of result values of
the Manual Test. There is no command form of this command.
BER
TEST:MAN:BER:STAT ON|OFF|1|0
TEST:MAN:BER:STAT?
CPICH RSCP
TEST:MAN:CPRS:STAT ON|OFF|1|0
TEST:MAN:CPRS:STAT?
Table 6-11 Command Cross Reference for [Stand-by] Screen
Item Command
Table 6-12 Command Cross Reference for [Measuring] Screen
Item Command
Power Control Level
TEST:MAN:PLEV UP|DOWN|CONTUP|CONTDOWN|HOLD <int>
TEST:MAN:PLEV?
Location Update
TEST:MAN:LOC
BS Call
TEST:MAN:BSC
BS Release
TEST:MAN:BSR
MS Answer
TEST:MAN:MSA
Signaling State
TEST:MAN:SIGN:STAT?
Call Clear Status
TEST:MAN:SCL
Signaling Results
TEST:MAN:RES:SIGN?
CPICH RSCP
TEST:MAN:CPRS:MEAS
Table 6-13 Command Cross Reference for Manual Test Result
Item Command
PRACH Power Measurement
TEST:MAN:RES:PRACH?
TX Power Measurement
TEST:MAN:RES:TXP?
Frequency Error Measurement
TEST:MAN:RES:FREQ?
EVM Measurement
TEST:MAN:RES:EVM?