Agilent Technologies N9360A, Programming Manual

Page: 34 / 180

4-8 N9360A Multi UE Tester W-CDMA Programming Manual
4
Programming Command Guidelines
The terminator outputted from the Tester can be change as
specified in
Table 4-3 .
The terminator inputted to the Tester is LF (fixed).
Refer to the following procedure to set the serial port
configuration.
Step 1
On the [Initial] screen, press the
Config
softkey to obtain the
[Configuration] screen:
Table 4-3 Serial Port Configuration
Item Preset Other Choices
Baud Rate: 9600 19200, 38400, 57600, 115200
Data Length: 8 7
Stop bits: 1 1.5, 2
Parity: None Odd, Even
Xcontrol: None Xon/Xoff
Terminator: CR+LF CR, LF
Figure 4-3 [Configuration] Screen (RS-232C Interface)