Agilent Technologies N9360A, Programming Manual

Page: 111 / 180

Programming Command Reference
5
N9360A Multi UE Tester W-CDMA Programming Manual 5-65
If the setting with
<int 1>
and
<int 2>
format is performed,
the format of the query returns to
<int 1>
and
<int 2>
format.
This query command returns the set Band and Channel number
of RFCH with integer. The range of the value is same as that of
the command parameter.
Frequency
TXANalyzer:RFCH:FREQuency <real>
TXANalyzer:RFCH:FREQuency?
This command sets the frequency. The allowable range and
preset values are as follows:
This query command returns the set frequency of the RFCH
with real. The range of the value is same as that of the command
parameter.
TXANalyzer:RFCH:FREQuency <int 1>,<real 2>
TXANalyzer:RFCH:FREQuency?
This command specifies a Band and frequency for RF (uplink)
on Stand-by screen.
<int 1>
is a Band and set to
1
at preset.
<int 2>
is a
frequency (uplink frequency) and set to
1922400000
at preset.
The allowable ranges are as follows:
Table 5-11 Frequency Allowable Range and Preset Value
Band Allowable Range [Hz] Preset Value
1 1920000000 to 1980000000 in 2000 step 1922400000
6 830000000 to 840000000 in 2000 step,
832500000, 837500000 4162
Table 5-12 Band and Frequency Allowable range
Band Allowable Range [Hz]
1 1920000000 to 1980000000 in 2000 step
6 830000000 to 840000000 in 2000 step, 832500000, 837500000