Agilent Technologies N9360A, Programming Manual

Page: 142 / 180

6-18 N9360A Multi UE Tester W-CDMA Programming Manual
6
Programming Command Summary
After Measure Screens
The following query commands are used to return the set of
result values and Pass or Fail test results of the TX Analyzer
Test.
Signal Generator Screen
The following RFGenerator subsystem commands are used to
configure the functions and parameters for RF signal generator.
Table 6-17 TPOWer/TXAMplitude Command Summary
Item Command
TX Power Measurement
TXAN:RES:TXP?
Frequency Error Measurement
TXAN:RES:FREQ?
EVM Measurement
TXAN:RES:EVM?
Origin Offset Measurement
TXAN:RES:OOFF?
ACLR DSB 5MHz
TXAN:RES:ACLR5?
ACLR DSB 10MHz
TXAN:RES:ACLR10?
OBW
TXAN:RES:OBW?
Table 6-18 RFGenerator Subsystem Command Summary
Item Command
Radio System
RFG:RFOR W-CDMA
RFG:RFOR?
RFCH
RFG:CHAN <int>
RFG:CHAN <int 1>,<int 2>
RFG:CHAN?
Frequency
RFG:FREQ <real>
RFG:FREQ <int 1>,<real 2>
RFG:FREQ?
Amplitude
RFG:AMPL <real>
RFG:AMPL?
Modulation
RFG:MOD OFF|IDLE|IDLE+DPCH(PN9)|IDLE+DPCH(PN15)|<<
IDLE+DPCH(PN9)+OCNS|IDLE+DPCH(PN15)+OCNS
RFG:MOD?
RF Signal Output
RFG:RFOU ON|OFF|1|0
RFG:RFOU?