Agilent Technologies 8360 L Series, Service Manual

Page: 152 / 603

14. On the syn thesizer, press:
4
CW
5 First syn thesizer frequency in T able 2-19
4 POWER LEVEL 5 4 00 5 4 dBm 5
4 ALC 5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Leveling Mode Normal
4
MOD
5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Pulse On/Off Extrnl (asterisk on)
15. On the sp ectrum analyzer, set the cen ter frequency to the rst frequency in T able 2-19.
16. On the oscilloscop e, set:
Channel 1:
Volts/Division 30 mV
Timebase:
Time/Division 100 ns
Delay Reference At left
Adjust the dela y and timebase so that the pulse w a v eform takes up the en tire display .
Adjust the oscilloscop e c hannel 1 oset to p osition the top of the pulse en v elop e near the
cen ter graticule.
17. On the syn thesizer, turn o external pulse and set the p o w er lev el to 00.3 dBm. Press:
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Pulse On/Off Extrnl (asterisk o )
4 POWER LEVEL 5 4 00.3 5 4 dBm 5
Agilent 8360 P erformance T ests
Pulse P erformance (Alternate)
2-65