Agilent Technologies 8360 L Series, Service Manual

Page: 295 / 603

Figure 3-19. XA10J2 Location
4. Set the default v alues given in T able 3-4 in to the corresp onding amplier/lter
calibration constan ts. On the syn thesizer, set:
4 SERVICE 5
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Adjust Menu
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Calib Menu
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Select Cal En ter the n um b er of the rst calibration constan t from T able 3-4 and
terminate the en try with 4 ENTER 5. When using the fron t panel em ulator softw are,
pressing the arrow k eys will allo w y ou to v ary the calibration constan ts. The calibration
constan t sho wn at the top of the \display" windo w is the activ e constan t.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Modify Cal En ter the default v alue from T able 3-4 and terminate the en try with
4
ENTER
5.
Using the up/do wn arrow k eys, select eac h of the rest of the calibration constan ts in
T able 3-4 and set their default v alues b y en tering the v alue on the n umeric k eypad.
T erminate y our en try with the 4
ENTER
5 k ey .
3-38 Adjustments
Amplifier/Filter Adjustments
Agilent 8360