Agilent Technologies 8360 L Series, Service Manual

Page: 397 / 603

Setting Up the System
Hardw are Requirements
The automated tests require an HP 9000 series 200/300 desktop computer with at least 2.25
megab ytes of RAM, a disk driv e, and an GPIB in terface. This program will not run with
high resolution color monitors ( > 512 x 390 pixels). Softw are is pro vided on t w o 3.5 inc h
disks, formatted double-sided, and are usable in double-sided disk driv es only . An y required
measuremen t instrumen ts are listed in eac h test pro cedure.
Operating System Requirements
The test softw are requires BASIC v ersion 5.1 and the following binaries.
T able 5-1. Required Binaries
Language Extensions Driv ers
CLOCK CR T A or CR TB (dep ends on CR T)
COMPLEX CS80 or DISC (dep ends on disk)
CR TX HFS
EDIT HPIB
ERR SRM
GRAPH
GRAPHX
IO
KBD
MA T
MS
PDEV
TRANS
XREF
Refer to the BASIC user's do cumen tation for instructions on loading the op erating system
and binaries.
5-2 Automated T ests Agilent 8360