Agilent Technologies 8360 L Series, Service Manual

Page: 502 / 603

6. Major Assemblies Remo v al
Refer to Figure 7-59.
1. Complete \1. Preliminary Steps", \2. F ron t P anel Remo v al",
\7. J1 RF Output Connector Remo v al", and \5. Rear P anel Remo v al" b efore con tinuing.
2. Remo v e the six screws from the regulator shield.
3. Remo v e the shield.
4. Cut the tie wraps holding the cables attached to the PC assem blies.
5. Disconnect all cables attached to the PC assem blies.
6. Disconnect semi-rigid cable W54 from the A6 assem bly .
Note
All cables are lab eled for easy reassem bly . F or iden tication purp oses, the
extractors on the PC assem blies are color-co ded to indicate their assem bly
n um b er.
7. Pull out all PC assem blies.
Figure 7-59. Major Assemblies
7-72 Disassembly and Replacement Procedures
Motherboard
Agilent 8360