Page 62
22.10.2019
R01.43
Figure 53: T4X Channel Node, general release
(1) Power
(2) Frequency
(3) Channel Phase
Power (1)
Activate the T4X channel. The power can be adjusted from 0-100%, in this case the
duty cycle of the PWM is adjusted.
Frequency(2)
The control frequency of the T4X channel. At this frequency, the PWM output is pulsed.
Channel Phase (3)
The PWM output is not controlled permanently, but pulsed. This pulsing causes the
vibration of the aflex system. The pulse duration is set via the phase setting "Channel
phase" (3). It defines the period during which the output, with appropriate duty cycle
(1), is controlled within a frequency period (2). The maximum channel phase length is
75%.
1
2
3
