Page 20
22.10.2019
R01.43
3.2.3 Assembly on base plate
Insert the aflex with the four Flex bushings into the holes of the system base plate.
Observe the orientation of the device with regard to the subsequent cable connection.
Figure 6: Assembly on base plate
3.2.4 Dismantling the funnel plate
In order to fix the aflex on the base plate, the flex bushings must be tightened. Disman-
tle the funnel plate with the provided plastic wedge.
INSTRUCTION
Please use only the dismantling wedges for the dismantling pro-
cess of the funnel plate!
Insert the wedges into the gap between the white and the red plate.
First, press the two wedges together to tilt them outwards in a rotary movement.
The funnel plate is thereby detached from the magnets and can be removed.
