Page 32
22.10.2019
R01.43
Search Devices (3)
The aflexConfigurator searches for existing control units using the "Search Devices"
button in the network
Display the control units (4)
This field lists the control units found on the network. Also stored control units are
displayed from previous program starts.
4.3.1 Control unit States
The control units found or stored in the network have different device status properties.
These are described below.
Figure 15: Display ControlUnit
(1) ControlUnit Name
(2) Remove ControlUnit from lists
(3) IP Address
(4) Series number
(5) Network status, Subnet
(6) Ping Status
(7) Ping reply
(8) Save ControlUnit
(9) Establish connection
ControlUnit Name (1)
The name of the ControlUnit can be changed in the aflexConfigurator and the applica-
tion can be adjusted. This facilitates the identification while using more aflex devices.
Remove ControlUnit (2)
Remove the ControlUnit from the display. If the control unit is located in the same
network, it can be found again via "Search Devices".
IP Address (3)
The IP address of the ControlUnit
2
1
4
5
6
8
7
9
9
