R01.43
22.10.2018
Page 73
In the menu “parameters” the actual parameters are shown.
(1) aflex Inputs
(2) aflex Outputs
(3) Refresh
(4) Set Input
aflex Inputs(1):
From the superior PLC to the aflex.
aflex Outputs(2):
From the aflex to the superior PLC.
Ausgänge des aflex aus Sicht des aflex. Vom aflex in die Übergeordnete Steuerung.
Refresh (3):
Values only actualized by clicking this button.
Set Input (4):
It’s not allowed to set the Inputs from the webserver. Following error message occurs
when using this function.
1
2
3
4
