R01.43
22.10.2018
Page 55
Figure 41: Telnet Configuration
(1) Activate Telnet-Server
(2) Telnet Port
(3) Console for Telnet-Control
(4) Telnet Heartbeat
(5) Establish connection
(6) Login
(7) Sending the command line
(8) Delete the receiving messages
Telnet-Server
Each control unit has a telnet server from which the aflex can communicate with a
higher-level control. The server is activated in the "aflexConfigurator". More detailed
information about the Telnet protocol can be found in the section
Activate Telnet-Server (1)
Activate the Telnet server
Telnet Port(2)
Port via which the telnet server is addressed
Console for Telnet-Control (3)
The console is used to simulate a superior control and to test the Telnet connection
quickly. After the connection and login has been done, it is possible to send com-
mands to the control unit
via the "command line".
Telnet Heartbeat (4)
3
1
2
6
7
8
8
5
