R01.43
22.10.2018
Page 61
4.7.2 T4X Client Node
The T4X module is a driver unit with four power channels. This module is used for
controlling the aflex actuators. For a standard aflex with eight actuators, two T4X mod-
ules are required. Only "Pulse Mode Continuous" is used to control the aflex actuators.
The actuator is controlled by a pulse-modulated signal.
Figure 51: T4X Client Node "Standard" view
(1) Client Node Information Line
The general information about the client node is displayed in the client node information
line (1). The serial number, hardware version and firmware version, this information
must be specified for a support request. Under this information the individual channels
of the T4X Node are displayed. The user level "standard" has no access rights to it.
This is visualized via the prohibition signs.
Figure 52: T4X Client Node "Advanced" view
(1) Status Release
From the user level "advanced" the T4X channels will be enabled. All settings exclusive
"min/max Power" and "pulse mode" can be adjusted. However, the general release is
required to activate the T4X channels. As shown in the figure above, all functions are
deactivated and greyed out when the release is missing. The release status of the
individual channels is also displayed via the display (1). The general release is set via
the toggle button in the "main menu".
1
1
