Page 60
22.10.2019
R01.43
Save to EEPROM(3)
This function is available from the user level "advanced". Saves the settings of the
selected client node in the permanent memory.
Add Client Node(3)
This function is available from user level "admin". Adds a new client node. The client
node type and the serial number must be entered.
Figure 49: Add Client Node
Change Client Node(4)
This function is available from user level "admin" and is used to exchange client nodes.
The serial number of the new client node is entered in the text field. All settings of the
currently selected client node are transferred to the new one. The current client node
is then deleted. If the client node is used in an aflex module, these settings are also
accepted.
Figure 50: Exchange Client Node
Delete Client Node (5)
Available from user level "admin". Deletes the currently selected client node. Only after
saving all parameters via the "controller menu" is this permanently removed from the
permanent memory.
