R01.43
22.10.2018
Page 35
4.3.2 Advanced display for Advanced and Administrator user
If the user "admin"
or “advanced” are activated, further displays and options are visible
on the start page. These are described below.
Figure 19: Start page display advanced
In advanced mode, the computer's local Ethernet endpoints are displayed. This is used
to search the devices in the network via UDP Broadcast.
Figure 20: Start page display admin
In admin mode a control unit can also be added via a button. The IP address is speci-
fied here. As soon as the aflexConfigurator finds a control unit with this IP address the
data will be loaded and displayed.
Figure 21: Control unit Display advanced
The display of the control unit is extended in the advanced mode by the MAC address
of the device. Each ping is checked via the MAC filter. This determines whether this
participant is a control unit. In the case of an IP address conflict, the MAC filter can be
deactivated to enable the connection to the control unit. In this case, the IP address of
the control unit should be adjusted.
