ADS Intrinsically-Safe TRITON+, Installation, Operation And Maintenance Manual

Page: 247 / 424

6-60 ADS Manual

Trigger
Enter the sampling trigger threshold corresponding to
the selected Type for which you want the sampler activities to
initiate. For example, if Depth is the selected Type , enter the
corresponding threshold value in inches (or millimeters) at
which you want the monitor to pulse the sampler.

Samples per wakeup
Select and enter or use the up/down
arrows to indicate the total, consecutive number of times you
want the monitor to pulse the sampler within a single interval
each time the trigger condition is met.

Pulse Length
Enter the duration of the pulse you want to
send to the sampler once sampling activities begin.
Data Optimization

Velocity Scrubbing
Select this checkbox to ensure the
monitor confirms questionable or erroneous velocity readings
based on the historical relationship between the ultrasonic
depth and velocity data for the location.

Automatic Pressure Calibration
Select this checkbox to
ensure the monitor automatically calibrates questionable or
erroneous pressure depth data to read consistently with the
ultrasonic depth data. The monitor will maintain a running
average of the difference between the pressure depth and the
ultrasonic depth data throughout the day. At midnight each
day, the monitor will apply a new offset based on the most
recent difference in the running average.
Combo Sensor to Use

Depth
Select the combo sensor containing the depth sensor
you want to use for processes involving MLI and to generate
UNIDEPTH.

Velocity
Select the combo sensor containing the velocity
sensor you want to use for processes involving MLI and to
generate RAWVEL.