Configuration and Activation 6-39
most common option for selection. ADS recommends
using this setting for most monitoring applications.
Backward
Choose this option for monitoring points at
which the Surface Combo Sensor has been positioned
facing downstream and to ensure the monitor only analyzes
flows moving
away
from the face of the sensor. One
application in which this would be the preferable option
would be for measuring velocity in an outgoing line
following two incoming lines in the manhole.
Backward Bidirectional
Choose this option when the
Surface Combo Sensor is installed facing downstream and
to ensure the monitor analyzes flows moving both away
from and toward the face of the sensor. This option would
be beneficial, for example, when using a weir to measure
overflows with the potential of river intrusion.
Maximum Velocity
Select the maximum expected velocity
that will occur at the site for the monitor to use in fine-tuning
the velocity data. The
Auto
(
default
) option serves to optimize
the range and resolution of the velocity data samples to match
the characteristics of the flow. However, if the velocity
readings at the location measure at least 10 feet per second
(fps) on a regular basis, ADS recommends choosing the
15
fps
option for this parameter.
Transmit Frequency
Select the frequency at which to
transmit the signal. ADS recommends leaving the default
setting (
Normal
) for most applications. However, if hydraulic
conditions at the site are resulting in questionable or erroneous
readings, consider applying the other frequency option.
Contact ADS for assistance when necessary.
Gain
This value represents the factor applied to
raw
velocity
(RAWVEL entity in
Qstart
) to determine average velocity and
to calculate quantity for the Flow 1(2) device.
Note:
The
Cross Check Gain
parameter does not apply
to the (Surcharge) Peak Velocity Sensor; therefore, it is not
available on the
Peak Velocity
tab.
Summary of Contents for Intrinsically-Safe TRITON+
