Maintenance and Troubleshooting 10-23
SIM card slightly ejected from its secure position in holder
7.
Slide the SIM card completely out of the holder.
8.
(
applies only when using SIM cards with static IP addresses
)
Record the number of the
new
SIM card (i.e., the IP address)
on the site report. You will need this address to update the LIF
in the
Qstart
software. The IP address is printed directly on the
SIM card or on a label affixed to the card.
9.
Insert the SIM card into the groove in the holder on the inside
of the enclosure, notched edge first with the contacts facing the
pressure valve. Slide the SIM card
all the way
into the holder,
and press down to lock it into place. The holder’s spring
mechanism should secure the card in the holder.
Empty SIM card holder showing pressure valve (left); inserting the SIM card
properly into the holder
Summary of Contents for Intrinsically-Safe TRITON+
