8-11
Sample Driver
6
R
X
D
MA
C
TRL
(offset D0h): This register controls receive DMA operation and frame
acceptance criteria.
Required Fields:
– RxCompletionQ2Enable: Enable the second Receive Completion Descriptor
Queue if needed.
– RxDmaQueueMode: Select the queue sorting criteria, if a second queue is needed.
Sorting may be based on packet size or priority.
7
R
X
D
ESC
Q
UEUE
1C
TRL
(offset D4h): This register defines Receive Buffer Descriptor
Queue 1.
Required Fields:
– RxQ1BufferLength: Select the size of each receive buffer in Queue 1.
– RxPrefetchDescriptorsMode: Select normal or polling receive model. This value
also applies to a second Receive Buffer Descriptor Queue, if used.
– RxDescQ1Entries: Select the size of Receive Buffer Descriptor Queue 1 - either 256
or 2048 entries. This entry must be selected even if variable size queues are used.
In this case, this size is the maximum size of the variable size queue.
– RxVariableSizeQueues: Select the variable or fixed size Receive Buffer Descriptor
Queue.
8
R
X
D
ESC
Q
UEUE
2C
TRL
(offset D8h): This register defines Receive Buffer Descriptor
Queue 2. It is required only if two Receive Buffer Descriptor Queues are used.
Required Fields:
– RxQ2BufferLength: Specify the size of each receive buffer in Queue 2. If two
Receive Buffer Descriptor Queues are implemented, and sorting is based on
packet size, this length is used as the sorting criteria. Packets larger than this
length are DMA-transferred to Queue 1, while larger packets are placed in Queue
2.
– RxDescQ2Entries: Select the size of Receive Buffer Descriptor Queue 2 - either
256 or 2048 entries. This entry must be selected even if variable size queues are
used.
9
R
X
D
ESC
Q
UEUE
1L
OW
A
DDRESS
(offset E0h): This register defines the location of
Receive Buffer Descriptor Queue 1.
Required Fields:
– RxDescQ1LowAddress: Assign the base address of the first Receive Buffer
Descriptor Queue in hardware.
10
R
X
D
ESC
Q
UEUE
2L
OW
A
DDRESS
(offset E4h): This register defines the location of
Receive Buffer Descriptor Queue 2. It is required only if two queues are used.
Required Fields:
– RxDescQ2Address: Assign the base address of the second Receive Buffer
Descriptor Queue in hardware.
