Abov MC96F6332D, User Manual

Page: 223 / 327

MC96F6432
June 22, 2018 Ver. 2.9 223
11.12.22 Register Map
Table 11-21 USI0 Register Map
Name Address Dir Default Description
USI0BD E3H R/W FFH USI0 Baud Rate Generation Register
USI0DR E5H R/W 00H USI0 Data Register
USI0SDHR E4H R/W 01H USI0 SDA Hold Time Register
USI0SCHR E7H R/W 3FH USI0 SCL High Period Register
USI0SCLR E6H R/W 3FH USI0 SCL Low Period Register
USI0SAR DDH R/W 00H USI0 Slave Address Register
USI0CR1 D9H R/W 00H USI0 Control Register 1
USI0CR2 DAH R/W 00H USI0 Control Register 2
USI0CR3 DBH R/W 00H USI0 Control Register 3
USI0CR4 DCH R/W 00H USI0 Control Register 4
USI0ST1 E1H R/W 80H USI0 Status Register 1
USI0ST2 E2H R 00H USI0 Status Register 2
11.12.23 USI0 Register Description
USI0 module consists of USI0 baud rate generation register (USI0BD), USI0 data register (USI0DR), USI0 SDA
hold time register (USI0SDHR), USI0 SCL high period register (USI0SCHR), USI0 SCL low period Register
(USI0SCLR), USI0 slave address register (USI0SAR), USI0 control register 1/2/3/4 (USI0CR1/2/3/4), USI0
status register 1/2 (USI0ST1/2).
11.12.24 Register Description for USI0
USI0BD (USI0 Baud- Rate Generation Register: For UART and SPI mode) : E3H
7 6 5 4 3 2 1 0
USI0BD7 USI0BD 6 USI0BD 5 USI0BD 4 USI0BD 3 USI0BD 2 USI0BD 1 USI0BD 0
R/W R/W R/W R/W R/W R/W R/W R/W
Initial value : FFH
USI0BD[7:0]
The value in this register is used to generate internal baud rate in
asynchronous mode or to generate SCK0 clock in SPI mode. To
prevent malfunction, do not write
‘0’ in asynchronous mode and do
not write
‘0’ or ‘1’ in SPI mode.
NOTE) In common with USI0SAR register, USI0BD register is
used for slave address register when the USI0 I2C mode.