![background image](http://html1.mh-extra.com/html/abbott/architect-rhs/architect-rhs_training-manual_450972139.webp)
MODULE 5: MISCELLANEOUS
ARCHITECT
®
RSH System Service Training Guide
5-7
201532-102
FOR INTERNAL USE ONLY
Integration-ci8200
®
System
Use the ARCHITECT RSH and corresponding
ARCHITECT System Service and Support
Manual, Section 7 Pre-Site Interview
and
Inspection
and
Section 8 Installation
to view the
checklists discussed below.
This section discusses the procedures associated with integrating an ARCHITECT
®
c
8000
®
and
i
2000
SR
®
System to create an ARCHITECT
ci
8200
®
System. This involves
•
combining two RSH extrusions to form one continuous sample handler
•
leveling
c
8000 Processing module
•
jumper configuration on
i
2000
SR
Card Cage
•
installing interface brackets and filler pieces
•
hanging the RSH on
i
2000
SR
and marking a reference line on the front of the module
•
switching the priority bay (as needed)
•
installing a longer carrier transport belt
•
installing mounting and alignment pins at the interface
•
modifying cable routing
•
Connecting Cables from Card Cage to RSH
•
Installing RSH covers and end caps
•
Calibration of robotic positions
•
Performance Verification Test
NOTE: Proper installation of RSH is critical to performance. Use care when handling
belts and cables.
Installation Tips:
•
Be sure to handle the Flex Cable properly to prevent cable and Carrier Transport Sensor
damage.
•
Carefully connect both PM Carrier Positioner Assembly cables at the Cable Strain Relief area
on the right side.
•
When routing the belt, check to ensure it is straight prior to attaching it to the Bearing
Assembly.
•
Prior to completing the RSH installation, ensure the bay partition alignment is completed for
proper tray tension.
•
When adding insert screws for
ci
8200 System integration, be sure they are loose at the start
and each screw is equally tightened.
•
Follow the leveling sequence for the
i
2000
SR
System to prevent RSH and
i
2000 errors.
•
Separate the
ci
8200 System prior to moving/relocating the system.
Summary of Contents for ARCHITECT RHS
Page 156: ...APPENDIX A 2 ARCHITECT RSH Service Training Guide FOR INTERNAL USE ONLY 201532 102 Notes Page ...
Page 158: ...APPENDIX A 4 ARCHITECT RSH Service Training Guide FOR INTERNAL USE ONLY 201532 102 Notes Page ...
Page 160: ...APPENDIX A 6 ARCHITECT RSH Service Training Guide FOR INTERNAL USE ONLY 201532 102 Notes Page ...
Page 162: ...APPENDIX A 8 ARCHITECT RSH Service Training Guide FOR INTERNAL USE ONLY 201532 102 Notes Page ...