ABB Relion 670 series, Installation And Commissioning Manual

Page: 231 / 260

• Use event masks
• Report no events
• Report all events
In test mode, individual event blocks can be blocked from PCM600.
Individually, event blocks can also be blocked from the local HMI under
Main menu/Test/Function test modes/Monitoring/EventCounter(GGIO)/
CNTGGIO:x
15.14 Metering
15.14.1 Pulse counter PCGGIO
The test of the Pulse counter function PCGGIO requires the Parameter Setting tool
in PCM600 or an appropriate connection to the local HMI with the necessary
functionality. A known number of pulses with different frequencies are connected
to the pulse counter input. The test should be performed with settings
Operation =
On or Operation = Off and the function blocked or unblocked. The pulse counter
value is then checked in PCM600 or on the local HMI.
15.15 Station communication
15.15.1 Multiple command and transmit MultiCmd/MultiTransm
The multiple command and transmit function (MultiCmd/MultiTransm) is only
applicable for horizontal communication.
Test of the multiple command function block and multiple transmit is
recommended to be performed in a system, that is, either in a complete delivery
system as an acceptance test (FAT/SAT) or as parts of that system, because the
command function blocks are connected in a delivery-specific way between bays
and the station level and transmit.
Command and transmit function blocks included in the operation of different built-
in functions must be tested at the same time as their corresponding functions.
1MRK 502 029-UEN A
Section 15
Verifying settings by secondary injection
225
Installation and commissioning manual