background image

 

MSRD07 Rev D 

010819 

 

 

User Instruction Manual 

 

DuraTech™ 6' Mini Single/Twin Self Retracting Device 

 

This manual is intended to meet the Manufacturer's Instructions as required by the American National Standards 

Institute (ANSI) Z359 and should be used as part of an employee training program as required by the Occupational 

Safety and Health Act (OSHA). 

WARNING 

This product is part of a personal fall arrest, restraint, work positioning, suspension, or rescue system. A Personal Fall 

Arrest System (PFAS) is typically composed of an anchorage and a Full Body Harness (FBH), with a connecting device, 

i.e., a Shock Absorbing Lanyard (SAL), or a Self-Retracting Device (SRD), attached to the dorsal D-ring of the FBH. 

These instructions must be provided to the worker of this equipment. The worker must read and understand the 

manufacturer's instructions for each component or part of the complete system. Manufacturer's instructions must be 

followed for proper use, care, and maintenance of this product. These instructions must be retained and be kept 

available for the worker’s reference at all times.  Alterations or misuse of this product, or failure to follow 

instructions, may result in serious injury or death. 

 

A Fall Protection Plan must be on file and available for review by all workers. It is the responsibility of the worker and 

the purchaser of this equipment to assure that workers of this equipment are properly trained in its use, 

maintenance, and storage. Training must be repeated at regular intervals. Training must not subject the trainee to fall 

hazards.

 

 

Consult a doctor if there is reason to doubt your fitness to safely absorb the shock of a fall event. Age and fitness 

seriously affect a worker’s ability to withstand falls. Pregnant women or minors must not use this equipment. 

   

NOTE:  

For more information consult ANSI Z359

 

 

FallTech 

1306 South Alameda Street 

Compton, CA 90221, USA 

1-800-719-4619 

1-323-752-0066 

www.FallTech .com 

 

 

 

 

Summary of Contents for DuraTech 6 Mini




































Reviews: