ABB ACS1000i air-cooled, User Manual

Page: 11 / 174

01 ABOUT THIS MANUAL
3BHS206977 E01 REV H ACS1000I AIR-COOLED USER MANUAL 11/174
The manual addresses personnel who are responsible for unpacking, transportation,
installation, operation and maintenance of the drive. The personnel must carry out the below
listed tasks in a manner that does not cause physical harm or danger, and ensures the safe and
reliable functioning of the drive.
1.7.1 Handling
The personnel must be skilled and experienced in unpacking and transporting
heavy equipment.
1.7.2 Mechanical installation
The personnel must be qualified to prepare the installation site according to the site and
equipment requirements and to perform the installation accordingly.
1.7.3 Electrical installation
The personnel must have a sound knowledge of the relevant electrical codes and specifications
covering low and medium voltage equipment, be experienced with electrical wiring principles
and know the electrical symbols typically used in wiring diagrams.
1.7.4 Operation
The personnel include all persons who operate the drive from the local operator panel of the
drive. The personnel must know the functions of the operator panel, be adequately trained for
the drive, and know the driven process. Special knowledge of frequency converter technology
is not required.
1.7.5 Maintenance
The personnel include all persons who
- Are qualified to carry out preventive and corrective maintenance on drive as described in
this manual
- Are thoroughly familiar with the drive
- Have a sound knowledge of the relevant electrical codes and specifications covering low
and medium voltage equipment
- Are able to assess the hazards associated with the energy sources of the drive and
act correspondingly
- Know the safe shutdown and grounding procedures for the drive system
1.8 User’s responsibilities
It is the responsibility of those in charge of the drive to ensure that each person involved in the
installation, operation or maintenance of the drive has received the appropriate training and
has thoroughly read and clearly understood the instructions in this manual and the relevant
safety instructions.
Commissioning of the drive must only be performed by qualified and certified
ABB personnel.