ABB ACS1000i air-cooled, User Manual

Page: 145 / 174

10 CDP CONTROL PANEL
3BHS206977 E01 REV H ACS1000I AIR-COOLED USER MANUAL 145/174
10.4.2 Remote control
In remote control mode, operational commands or reference values come from a higher-level
control system via fieldbus or remote I/O.
However, with the following parameter settings it is possible to start and stop the drive, to set
the motor’s direction of rotation, and to enter reference values from the CDP control panel.
- 11.01 EXT1 START/STOP/DIR = 10 (KEYPAD) or
12.03 EXT REF1 SELECT = 1 (KEYPAD) and
12.02 EXT1/EXT2 SELECT = 1 (EXT1)
- 11.02 EXT2 START/STOP/DIR 10 (KEYPAD) or
12.06 EXT REF2 SELECT = 1 (KEYPAD) and
12.02 EXT1/EXT2 SELECT = 2 (EXT2)
To enter remote control, press the LOC-REM key.
- Full remote control from a higher-level control system is indicated by a blank space.
- Partial remote control (some commands enabled locally) is indicated by the letter R.
1 600.0 rpm 0
Status Ready to Strt
MotorSpeed 0.00 rpm
Power 0.0 %
ACT PAR FUNC DRIVE
LOC
I 0
RESET REF
ENTER
REM
1 R 600.0 rpm 0
Status Ready to Strt
MotorSpeed 0.00 rpm
Power 0.0 %
ACT PAR FUNC DRIVE
LOC
I 0
RESET REF
ENTER
REM