3Com S7902E, Configuration Manual

Page: 933 / 2621

1-9
To do… Use the command… Remarks
Enter system view
system-view
—
Enter route policy node view
route-policy route-policy-name
{ deny | permit } node
node-number
Required
Not created by default.
Set the AS-PATH attribute for
BGP routing information apply as-path
as-number
&<1-10> [ replace ]
Optional
Not set by default.
Delete the community attribute
of BGP routing information using
the community list
apply comm-list
comm-list-number delete
Optional
Not configured by default.
Set the community attribute for
BGP routing information
apply community { none |
additive |
{ community-number &<1-16> |
aa:nn &<1-16> | internet |
no-export-subconfed |
no-export | no-advertise } *
[ additive ] }
Optional
Not set by default.
Set a cost for routing information apply cost [ + | - ] value
Optional
Not set by default.
Set a cost type for routing
information apply cost-type [ external |
internal | type-1 | type - 2 ]
Optional
Not set by default.
Set the extended community
attribute for BGP routing
apply extcommunity { rt
{ as-number:nn |
ip-address:nn } }&<1-16>
[ additive ]
Optional
Not set by default.
for IPv4 routes
apply ip-address next-hop
ip-address
Optional
Not set by default.
The setting does not apply to
redistributed routing
information.
Set the next
hop
for IPv6 routes
apply ipv6 next-hop
ipv6-address
Optional
Not set by default.
The setting does not apply to
redistributed routing
information.
Inject routing information to a
specified ISIS level apply isis { level-1 | level-1-2 |
level-2 }
Optional
Not configured by default.
Set the local preference for BGP
routing information
apply local-preference
preference
Optional
Not set by default.
Set MPLS label apply mpls-label
Optional
Not set by default.
Set the origin attribute for BGP
routing information apply origin { egp as-number |
igp | incomplete }
Optional
Not set by default.
Set the preference for the
routing protocol
apply preference preference
Optional
Not set by default.