3Com S7902E, Configuration Manual

Page: 1968 / 2621

1-19
[Switch-GigabitEthernet2/0/1] port-security ntk-mode ntkonly
3) Verify the configuration
After completing the above configurations, you can use the following command to view the port security
configuration information:
<Switch> display port-security interface gigabitethernet 2/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
GigabitEthernet2/0/1 is link-up
Port mode is macAddressElseUserLoginSecure
NeedToKnow mode is NeedToKnowOnly
Intrusion Protection mode is NoAction
Max MAC address number is 64
Stored MAC address number is 0
Authorization is permitted
Use the following command to view MAC authentication information:
<Switch> display mac-authentication interface gigabitethernet 2/0/1
MAC address authentication is enabled.
User name format is fixed account
Fixed username:aaa
Fixed password:123456
Offline detect period is 60s
Quiet period is 5s
Server response timeout value is 100s
The max allowed user number is 2048 per slot
Current user number amounts to 3
Current domain is mac
Silent MAC User info:
MAC Addr From Port Port Index
GigabitEthernet2/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 3, failed: 7
Max number of on-line users is 1024
Current online user number is 3
MAC Addr Authenticate state Auth Index
1234-0300-0011 MAC_AUTHENTICATOR_SUCCESS 13
1234-0300-0012 MAC_AUTHENTICATOR_SUCCESS 14
1234-0300-0013 MAC_AUTHENTICATOR_SUCCESS 15
Use the following command to view 802.1X authentication information:
<Switch> display dot1x interface gigabitethernet 2/0/1