3Com S7902E, Configuration Manual

Page: 560 / 2621

1-16
<Sysname> system-view
[Sysname] local-user ftp
[Sysname-luser-ftp] password simple pwd
[Sysname-luser-ftp] authorization-attribute work-directory level 3
[Sysname-luser-ftp] authorization-attribute work-directory flash:/
To access an SMB of the IRF (suppose that the member ID and slot number of the member device
where the SMB resides are 2 and 1 respectively), you must configure the following:
[Sysname-luser-ftp] authorization-attribute work-directory chassis2#slot1#flash:/
[Sysname-luser-ftp] service-type ftp
[Sysname-luser-ftp] quit
# Enable FTP server.
[Sysname] ftp server enable
[Sysname] quit
2) Configure the PC (FTP Client)
# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)):ftp
331 Password required for ftp.
Password:
230 User logged in.
# Download the configuration file config.cfg of the device to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file newest.app to the root directory of the storage medium on the AMB of
the IRF.
ftp> put newest.app
ftp> bye
z
You can take the same steps to upgrade configuration file with FTP. When upgrading the
configuration file with FTP, put the new file under the root directory of the storage medium.
z
After you finish upgrading the Boot ROM program through FTP, you must execute the bootrom
update command to upgrade the Boot ROM.
3) Upgrade Device
# Copy the startup file newest.app from PC to the root directory of the storage media of the SMBs of the
IRF (the member ID and slot number of the member device where one SMB resides are both 1; the
member ID and slot number of the member device where another SMB resides are 2 and 0 respectively;
the member ID and slot number of the member device where the third SMB resides are 2 and 1
respectively).