3Com S7902E, Configuration Manual

Page: 2377 / 2621

1-22
User(2.2.2.2:(none)):aaa
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Download the soft-version2.app programs on the FTP server to the Flash of Device.
[ftp] binary
200 Type set to I.
[ftp] get soft-version2.app
[ftp] bye
<Device>
# Upgrade the Boot ROM file of the active SRPU (resides in slot 0).
<Device> bootrom update file soft-version2.app slot 0
# Upgrade the Boot ROM file of the standby SRPU (resides in slot 1).
<Device> copy soft-version2.app slot1#flash:/soft-version2.app
<Device> bootrom update file slot1#flash:/soft-version2.app slot 1
# Specify the application program for the next boot on the active SRPU.
<Device> boot-loader file soft-version2.app slot 0 main
# Specify the application program for the next boot on the standby SRPU.
<Device> copy soft-version2.app slot1#flash:/soft-version2.app
<Device> boot-loader file slot1#flash:/soft-version2.app slot 1 main
# Reboot the device. The software version is upgraded now.
<Device> reboot
After the device reboots, use the display version command to check if the upgrade is successful.
Remote Upgrade Configuration Example (Distributed IRF Device)
Network requirements
z
As shown in Figure 1-3 , the current software version is soft-version1 for the IRF system. Upgrade
the software version of the IRF system to soft-version2 and configuration file to new-config .
z
The latest application soft-version2.app and the latest configuration file new-config.cfg are both
saved on the TFTP server.
z
The IRF contains two member devices, Master with the member ID of 1 and Slave with the member
ID of 2. The active SRPU of Master is in slot 0, and the standby SRPU of Master is in slot 1. The
active SRPU of Slave is in slot 0, and the standby SRPU of Slave is in slot 1.
z
The IP address of the IRF system is 1.1.1.1/24, the IP address of the TFTP server is 2.2.2.2/24,
and the TFTP server is reachable.