3Com S7902E, Configuration Manual

Page: 2398 / 2621

2-8
The path and filename prefix of a saved configuration file must be specified before you configure the
automatic saving period.
Saving the Current Running Configuration Manually
Automatic saving of the current running configuration occupies system resources, and frequent saving
greatly affects system performance. Therefore, if the system configuration does not change frequently,
you are recommended to disable the automatic saving of the current running configuration and save it
manually.
If the modification to the configuration fails, or is complicated, you can save the current running
configuration manually before you modify it. Therefore, if it really fails, the device can revert to the
configuration state before the modification.
Follow the step below to save the current running configuration manually:
To do… Use the command… Remarks
Save the current running
configuration manually
archive configuration
Required
Available in user view
The path and filename prefix of a saved configuration file must be specified before you save the current
running configuration manually; otherwise, the operation fails.
Setting Configuration Rollback
Follow these steps to set configuration rollback:
To do… Use the command… Remarks
Enter system view
system-view
—
Set configuration rollback
configuration replace file
filename
Required