3Com S7902E, Configuration Manual

Page: 2412 / 2621

1-9
Displaying and Maintaining SNMP
To do… Use the command… Remarks
Display SNMP agent system
information, including the
contact, location, and version of
the SNMP
display snmp-agent sys-info
[ contact | location | version ]*
Display SNMP agent statistics
display snmp-agent
statistics
Display the SNMP agent
engine ID display snmp-agent
local-engineid
Display SNMP agent group
information
display snmp-agent group
[ group-name ]
Display basic information of the
trap queue display snmp-agent trap
queue
Display the modules that can
send traps and whether their
trap sending is enabled or not
display snmp-agent trap-list
Display SNMPv3 agent user
information
display snmp-agent
usm-user
[ engineid engineid |
username user-name | group
group-name ] *
Display SNMPv1 or v2c agent
community information display snmp-agent
community
[ read | write ]
Display MIB view information
for an SNMP agent
display snmp-agent
mib-view
[ exclude | include |
viewname view-name ]
Available in any view
SNMPv1/SNMPv2c Configuration Example
Network requirements
z
As shown in Figure 1-3 , the NMS connects to the agent through an Ethernet.
z
The IP address of the NMS is 1.1.1.2/24.
z
The IP address of the agent is 1.1.1.1/24.
z
The NMS monitors and manages the agent using SNMPv1 or SNMPv2c. The agent reports errors
or faults to the NMS.
Figure 1-3 Network diagram for SNMPv1/v2c
Configuration procedure
1) Configuring the SNMP agent