3Com S7902E, Configuration Manual

Page: 531 / 2621

1-37
Global unicast address(es):
3001::1:1, subnet is 3001::/64
Joined group address(es):
FF02::1:FF13:1
FF02::1:FF01:1
FF02::1:FF00:0
FF02::2
FF02::1
MTU is 1460 bytes
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
...
<SwitchB> display ipv6 interface tunnel 2 verbose
Tunnel2 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::2024:1
Global unicast address(es):
3001::1:2, subnet is 3001::/64
Joined group address(es):
FF02::1:FF24:1
FF02::1:FF01:2
FF02::1:FF00:0
FF02::2
FF02::1
MTU is 1460 bytes
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
...
# Ping the IPv6 address of the peer interface VLAN-interface 100 from Switch A.
[SwitchA] ping ipv6 2002:3::1
PING 2002:3::1 : 56 data bytes, press CTRL_C to break
Reply from 2002:3::1
bytes=56 Sequence=1 hop limit=64 time = 31 ms
Reply from 2002:3::1
bytes=56 Sequence=2 hop limit=64 time = 1 ms
Reply from 2002:3::1
bytes=56 Sequence=3 hop limit=64 time = 16 ms
Reply from 2002:3::1
bytes=56 Sequence=4 hop limit=64 time = 16 ms
Reply from 2002:3::1
bytes=56 Sequence=5 hop limit=64 time = 31 ms
--- 2002:3::1 ping statistics ---