1-1
1
Basic Configurations
While performing basic configurations of the system, go to these sections for information you are
interested in:
z
Configuration Display
z
Basic Configurations
z
CLI Features
Configuration Display
To avoid duplicate configuration, you can use the
display
commands to view the current configuration
of the device before configuring the device. The configurations of a device fall into the following
categories:
z
Factory defaults: When devices are shipped, they are installed with some basic configurations,
which are called factory defaults. These default configurations ensure that a device can start up
and run normally when it has no configuration file or the configuration file is damaged.
z
Current configuration: The currently running configuration on the device.
z
Saved configuration: Configurations saved in the startup configuration file.
Follow these steps to display device configurations:
To do…
Use the command…
Remarks
Display the current validated
configurations of the device
display current-configuration
[ [
configuration
[
configuration
] |
interface
[
interface-type
]
[
interface-number
] ] [
by-linenum
] [
|
{
begin
|
exclude
|
include
}
regular-expression
] ]
Display the configuration saved
on the storage media of the
device
display saved-configuration
[
by-linenum
]
Available in any view.
For details of the
display saved-configuration
command, refer to
File System Management
Commands
in
the
System Volume.
Basic Configurations
This section covers the following topics:
z
Entering System View
Summary of Contents for S7902E
