3Com S7902E, Configuration Manual

Page: 2519 / 2621

1-28
Packet(s) arrived late: 0
# Display the history of DNS tests.
[DeviceA] display nqa history admin test
NQA entry(admin admin, tag test) history record(s):
Index Response Status Time
1 62 Succeeded 2008-11-10 10:49:37.3
FTP Test Configuration Example
Network requirements
Use the NQA FTP function to test the connection with a specified FTP server and the time necessary for
Device A to upload a file to the FTP server. The login username is admin , the login password is
systemtest , and the file to be transferred to the FTP server is config.txt .
Figure 1-6 Network diagram for FTP tests
Configuration procedure
# Create an FTP test group and configure related test parameters.
<DeviceA> system-view
[DeviceA] nqa entry admin test
[DeviceA-nqa-admin-test] type ftp
[DeviceA-nqa-admin-test-ftp] destination ip 10.2.2.2
[DeviceA-nqa-admin-test-ftp] source ip 10.1.1.1
[DeviceA-nqa-admin-test-ftp] operation put
[DeviceA-nqa-admin-test-ftp] username admin
[DeviceA-nqa-admin-test-ftp] password systemtest
[DeviceA-nqa-admin-test-ftp] filename config.txt
# Enable the saving of history records.
[DeviceA-nqa-admin-test-ftp] history-record enable
[DeviceA-nqa-admin-test-ftp] quit
# Enable FTP test.
[DeviceA] nqa schedule admin test start-time now lifetime forever
# Disable FTP test after the test begins for a period of time.
[DeviceA] undo nqa schedule admin test
# Display results of the last FTP test.
[DeviceA] display nqa result admin test
NQA entry(admin admin, tag test) test results:
Destination IP address: 10.2.2.2
Send operation times: 1 Receive response times: 1
Min/Max/Average round trip time: 173/173/173