3Com S7902E, Configuration Manual

Page: 54 / 2621

1-14
Configuring the Connection Mode of an Ethernet Port
This feature is supported on the internal 10GE ports.
When configuring an OAA application, to ensure the normal communication between the device and the
OAP card, you need to set the connection mode of the 10 GE ports connecting the device and the card
to extended .
Follow these steps to configure the working mode of an Ethernet port:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter 10 GE port view
interface interface-type
interface-number
—
Set the connection mode of the
10 GE port port connection-mode
{ extend | normal }
Required
Then connection mode of a 10
GE port is normal by default.
Displaying and Maintaining an Ethernet Port
To do… Use the command… Remarks
Display the current state of a
port and the related information
display interface
[ interface-type
[ interface-number ] ]
Available in any view
Display the summary of a port
display brief interface
[ interface-type
[ interface-number ] ] [ | { begin
| exclude | include }
regular-expression ]
Available in any view
Display information about
discarded packets on a port
display packet-drop interface
[ interface-type
[ interface-number ] ]
Available in any view
Display summary information
about discarded packets on all
ports
display packet-drop
summary
Available in any view
Clear the statistics of a port
reset counters interface
[ interface-type
[ interface-number ] ]
Available in user view
Clear the statistics of discarded
packets on a port
reset packet-drop interface
[ interface-type
[ interface-number ] ]
Available in user view
Display the Combo ports and
the corresponding
optical/electrical ports
display port combo Available in any view