3Com S7902E, Configuration Manual

Page: 1733 / 2621

2-3
Keyword and argument combination Description
acl ipv6 { access-list-number | name acl-name }
Specifies to match an IPv6 ACL specified by its
number or name. The
access-list-number
argument specifies an ACL by its number, which
ranges from 2000 to 3999; the
name acl-name
keyword-argument combination specifies an
ACL by its name.
any
Match all packets (IPv6 packets are ignored on
the SC cards.
customer-dot1p 8021p-list
Match the 802.1p priority of the customer
network. The
8021p-list argument is a list of up to
eight 802.1p priority values. An 802.1p priority is
in the range 0 to 7.
customer-vlan-id vlan-id-list
Specifies to match the packets of specified
VLANs of user networks. The
vlan-id-list
argument specifies a list of VLAN IDs, in the form
of
vlan-id to vlan-id or multiple discontinuous
VLAN IDs (separated by space). You can specify
up to eight VLAN IDs for this argument at a time.
VLAN ID is in the range 1 to 4094.
destination-mac mac-address Match a destination MAC address
dscp dscp-list
Match DSCP values. The dscp-list is a list of up
to eight DSCP values. A DSCP value is a
number in the range of 0 to 63 or a word
representing the specific value. For the
number-to-word mapping, see
Table 13-21 .
ip-precedence ip-precedence-list
Match IP precedence. The ip-precedence-list is
a list of up to eight IP precedence values. An IP
precedence is in the range of 0 to 7.
protocol protocol-name
Match a protocol. The protocol-name can be IP
or IPv6.
qos-local-id local-id-value
Match a local QoS ID, which is in the range of 1
to 4095. The local QoS IDs supported on the
S7900E series switches are from 1 to 3999.
service-dot1p 8021p-list
Match the 802.1p priority of the service provider
network. The
8021p-list argument is a list of up to
eight 802.1p priority values. An 802.1p priority is
in the range 0 to 7.
service-vlan-id vlan-id-list
Specifies to match the packets of the VLANs of
the operator’s network. The
vlan-id-list argument
is a list of VLAN IDs, in the form of vlan-id to
vlan-id or multiple discontinuous VLAN IDs
(separated by space). You can specify up to
eight VLAN IDs for this argument at a time.
VLAN ID is in the range of 1 to 4094.
source-mac mac-address Match a source MAC address
system-index index-value-list
Match a pre-defined match criterion
(system-index) for packets sent to the control
plane. The
index-value-list argument specifies a
list of up to eight system indexes. The system
index range is from 1 to 128.