![background image](http://html1.mh-extra.com/html/3com/ocg-voice-expansion/ocg-voice-expansion_user-manual_440820083.webp)
NAT/PAT Configuration
8 - 5
1) If the user kept the default NAT settings (the default is SuperNat) and if
the local workstation that initiated the tunnel is the one that is expecting
a NetMeeting call from the remote side, and also the one that is listed in
the default static NAT policy, then the incoming call from the remote side
will get directed to the intended workstation.
If any other local workstation initiated the tunnel, the incoming call from
the remote side will never be received by the intended workstation.
To configure the NAT/PAT settings for your WAN interface, perform the
following steps:
1
From your web browser, access the OfficeConnect Gateway page
(Default IP address: 192.168.1.1).
The Configuration options are displayed on the left-hand frame of the
OfficeConnect Gateway page.
2
Click
NAT/PAT Configuration
(located in the
Advanced
section of the
left-hand frame
) to
access the
NAT/PAT Configuration
page.
Summary of Contents for OCG VOICE EXPANSION -
