![background image](http://html1.mh-extra.com/html/3com/ocg-voice-expansion/ocg-voice-expansion_user-manual_440820101.webp)
VPN Configuration
8 - 23
7
Enter the Client IP address in the
Client IP Address
field. This is the
address of the workstation, network, or subnet on the LAN side of the
OfficeConnect Gateway that will be on one end of the VPN tunnel.
8
Select a connection type (
Single, Entire Network, or Customized
) from
the
Client Connection
drop-down menu.
If you select Customized, the page will dynamically change to show
the
Client IP Mask
field. Enter your Client IP Mask address in this field.
9
Enter the IP address of the Peer workstation in the
Peer IP Address
field.
10
Select a connection type (Single, Entire Network, or Customized) from
the
Peer Connection
drop-down menu.
If you select Customized, the page will dynamically change to show
the
Peer IP Mask
field. Enter the Peer IP Mask address in this field.
11
Select an IP Protocol (
All, TCP, or UDP
) from the
IP Protocol
drop-down
menu. If you select TCP or UDP, the page will dynamically change to
display the
Client IP
and
Peer IP
Port fields.
If you selected TCP or UDP, select the appropriate category (Allow all
Ports or Filter Port) for the Client and Peer IP Ports. If you select Filter
Port, the system will display a text box for entering the Port Number
you want filtered.
12
Select a security level (
Minimum, Maximum, or Custom
) from the
Security Level
drop-down menu. If you select Minimum or Maximum,
the OfficeConnect Gateway will utilize its default security settings for
each level.
If you select Custom, a separate Advanced IPSEC Settings window will
be displayed below the VPN Tunnel Configuration window. Use this
window to set up your custom IPSec parameters for your VPN Tunnel.
To customize the IPSEC Settings for your VPN, refer to the next
section,
Configuring your IPSEC Settings
.
13
If you selected Minimum or Maximum for your Security level, click
Apply
.
If you want to configure another IPSec tunnel, use the
Back
button on
your browser and do so now. If you are done configuring IPSec tunnels,
click
Finish
to put the current Security Policy into effect. Click
SaveAll
on
Summary of Contents for OCG VOICE EXPANSION -
