3Com OCG VOICE EXPANSION -, User Manual

Page: 113 / 177

IP Pool Configuration 8 - 35
■
Private : Select Private if you want to create an IP Address pool that
allows some of your remote users greater access to your network.
When an authenticated remote user’s request for an IP address
from this pool is received by the OfficeConnect Gateway, it will
allocate an IP address from this private pool to the remote user’s
computer.
6 Select an IP Pool Route ( Broadcast, Not Broadcast, Multiple Broadcast )
from the IP Pool Route drop-down menu. The default value for this field is
Not Broadcast .
■
Not Broadcast : When you create a Public or Private IP Pool, the IP
Addresses are not broadcast and are not listed in the RIP (Routing
Information Protocol) Routing Table until the IP Address from the
Address pool is assigned to an authenticated Remote User.
■
Broadcast : Select Broadcast to broadcast and make the IP Pool
Addresses visible in the RIP Table without the need to wait until a
Remote User is authenticated.
■
Multiple Broadcast : Select Multiple Broadcast to broadcast and
make the IP Pool Addresses visible in the RIP Table of multiple
remote servers without the need to wait until a Remote User is
authenticated.
7 Click the Apply button to implement your changes.
8 Click SaveAll on the menubar of the OfficeConnect Gateway to
permanently save the information.
To Modify an IP
Address Pool
To modify an IP Address Pool, perform the following steps:
1 Select Modify in the Edit Mode drop-down menu.
2 Select the name of the IP Address Pool you want to modify in the IP Pool
Name field.
3 Modify the parameters you want to change (Initial IP Address, IP Pool
Size, IP Pool State, IP Pool Route).
4 Click the Apply button to implement your changes.
5 Click SaveAll on the menubar of the OfficeConnect Gateway to
permanently save the information.