Zeon ENDEAVOUR Series, Инструкция по использованию и уходу, Страница: 8 / 316

Orascoptic™ Zeon™ Endeavour™ Series Headlight
INSTRUCTIONS FOR USE AND CARE
8
Connecting Your Zeon Endeavour Series Headlight to a Loupe or Other Eyewear
Secure the headlight cable to the temple arm of your frame by wrapping the spiral temple clip
around both the temple arm and cable. The cable also includes an adjustable gown clip to keep it
out of the working area.
Through-the-lens (TTL) Mount
Spiral Temple Clip
Curing Filter Flips Headlight Tilts
Slide the clip onto the mounting block and tighten the thumb screw on top.
If a mounting block is not attached to the bridge of your loupe frame, attach one
using the parts and instructions provided with your loupe connection kit.
Secure to the bridge of your frame by loosening the thumb screw on top to open
the jaw arms, then tighten the thumb screw to close the jaw arms over the top and
bottom of your frame bridge.
Use an optical screwdriver to loosen the mounting screw and open the mounting arms. Push the
universal mount down over the top of your frame with mounting clip in front of the carrier lens
and mounting arms behind the carrier lens. Center the universal mount over the bridge of your
loupe frame and tighten the mounting screw until the device is secure.
Secure to the hinge assembly by pushing the connector onto the front of the hinge. Orascoptic
offers different flip-up clips to secure to various Orascoptic and competitor flip-up hinges. Even if
your flip-up clip looks different from what is shown, the method to secure is still the same.
Universal Mount
Flip-up Mount
Jaw Mount
Connector
Hinge Assembly
Mounting
Arm
Mounting Clip
Mounting Screw
TTL Clip
Mounting Block
Thumb Screw
Thumb Screw
Jaw Clip