Zeon ENDEAVOUR Series, Инструкция по использованию и уходу, Страница: 10 / 316

Orascoptic™ Zeon™ Endeavour™ Series Headlight
INSTRUCTIONS FOR USE AND CARE
10
Operating Your Zeon Endeavour Series Headlight
Charging the Battery Pack
The Zeon Endeavour series battery pack is partially charged when shipped and should be fully charged prior to use.
To charge the battery pack, plug the power adapter into an electrical outlet and into the charger connection port
of the battery pack. The battery pack is capable of powering the headlight while charging.
LOW BATTERY INDICATOR LIGHT
• Illuminates when the battery charge is low and the headlight is turned on.
• Blinks when the battery charge is low and the headlight is turned off.
CHARGING INDICATOR LIGHT
• Illuminates while the battery pack is charging.
• Turns off when the battery pack is fully charged.
Operating the Battery Pack
1. Plug the headlight cable into the top of the headlight and into the headlight connection port of the battery
pack.
2. Touch and hold the control pad for a minimum of 2 seconds to turn the headlight on or off.
3. To increase the brightness, tap the control pad. With each tap, the brightness increases until the highest
setting is reached. The light returns to the lowest setting by tapping the control pad again.
4. During use, the battery pack can be clipped to your belt or secured in your pocket. The cable has a gown clip
attachment so it can be secured to your clothing to keep it out of the workng area.
5. Place your eyewear and headlight on your head and adjust to a comfortable working position. Turn the headlight
on and tilt it to the appropriate angle to illuminate your visual field.
Do not point the headlight directly in your eyes or the eyes of others around you.
When using or storing the unit, never bend or wrap the headlight cable tightly.
Doing so could damage the cable.
Charger
Connection Port
Charging
Indicator Light
Control Pad
Headlight
Connection Port
Low Battery
Indicator Light