Zeiss Crossbeam 550 Скачать руководство пользователя

Страница: 110 / 136

9 Shutdown and Disposal | 9.3 Disposal

ZEISS

Allowable Conditions during Storage and Transport

The packed microscope has to be stored in a dry place.

Allowable temperature during storage and transport:

Microscope:

between −10 °C and +70 °C

If a GIS system is part of the microscope, the GIS precursors have to be transported and stored
within the prescribed temperature ranges.

Allowable temperature during storage and transport:

Precursor:

Gold

−30 °C (at least < 8 °C)

Platinum

< 5 °C

XeF₂

< 5 °C

All other reservoirs are allowed to be stored and transported
without cooling. However, ZEISS recommends to cool all
reservoirs during transport.

9.3 Disposal

9.3.1 Disposing of Solid Waste (Consumables)

The operator must ensure that solid waste (consumables) is disposed of and recycled in a respon-
sible manner.

Description

Material

Disposal

Schottky field emitter

Tungsten, ceramics

Used up emitters may be re-
turned to the emitter manu-
facturer.

Apertures

Platinum, iridium, gold

Very small amounts. May be
disposed of in accordance
with local/regional regula-
tions.

Ion source (gallium)

Gallium

To be returned to ZEISS.

GIS Precursors

For information regarding the disposal of precursors, refer to
the instruction manual of the GIS.

9.3.2 Disposing of the Microscope

The operator must ensure that waste products are disposed of and recycled in a responsible man-
ner.

Refer to EC directive 2012/19/EC on waste electrical and electronic equipment (WEEE).

The microscope consists of several modules. Be careful to separate the materials properly when
you dispose of the microscope.

Materials: e.g. metals, non-metals, composite materials, process materials

Electronic scrap material: e.g. transformers, circuit boards, cables

Comply with national and regional waste disposal regulations.

110

Instruction Manual ZEISS Crossbeam 550L, Crossbeam 550 | en-US | Rev. 3 | 349500-8122-000

Содержание Crossbeam 550









































































































































Результаты поиска

Содержание Crossbeam 550

Отзывы:

Похожие инструкции для Crossbeam 550

Бренды по названию

Популярные бренды

Zeiss Crossbeam 550, Инструкция по эксплуатации

Результаты поиска

Содержание Crossbeam 550

Отзывы:

Похожие инструкции для Crossbeam 550

Бренды по названию

Популярные бренды