background image

10 Technical Data and Conformity | 10.2 Installation Requirements

ZEISS

Parameter

Description

High efficiency annular scintillator detector mounted in GEMINI col-
umn with optically coupled photomultiplier.

InLens EsB detector (optional):

Column-mounted high efficiency scintillator detector with optically
coupled photomultiplier for detection of energy and angle selective
backscattered electrons. Filtering grid adjustable from 0 V to −1.5 kV
for contrast adjustment.

Chamber detectors

SE detector:

Everhart-Thornley SE detector with optically coupled photomultiplier;
collector bias adjustable from −250 to +400 V

SESI detector (optional):

Combined Secondary Electron Secondary Ion (SESI) detector based on
a scintillator photomultiplier system; easy change between secondary
ion and secondary electron mode by converting the electrode voltage;
replaces the SE detector

CL detector (optional):

Cathodoluminiscence (CL) chamber detector

aSTEM detector (optional):

Pneumatically retractable multi-mode annular Scanning Transmission
Electron Microscopy (aSTEM) detector; enables bright field (BF), dark
field (DF), and high angle annular dark field (HAADF) detection

aBSD/BSD detector (optional):

Pneumatically retractable 5 or 6 segment multi-mode solid state BSE
detector; enables materials contrast, crystal orientation, and topo-
graphic imaging

Chamber camera

Color CCD camera

 with white-light illumination and IR illumination

Specimen current
monitor

6 range auto ranging for precise current measurement in the range of
1 pA to 10 µA

For more details, refer to the document Product Specification.

10.2 Installation Requirements

For a complete list of the installation requirements, refer to the document Installation Require-
ments.

Location Requirements

Parameter

Requirement

Installation site

Exclusively inside buildings

Recommended
room size

Min. 4.0 m × 5.0 m × 2.3 m

Service area

Min. 1.0 m at each side

Entrance

Min. 1.1 m wide

Hallways

Min. 1.3 m wide

114

Instruction Manual ZEISS Crossbeam 550L, Crossbeam 550 | en-US | Rev. 3 | 349500-8122-000

Содержание Crossbeam 550









































































































































Отзывы: