Yuanxin Electric YX2000, Руководство пользователя

Страница: 77 / 157

YX3000 Senseless Vector Type Inverter Manual
- 76 -
Chapter 6 Function Code Description
6.1 Basic running function parameter (P0 Group)
P0.00
Control mode
selection
Range: 0/1 1
0
：
V/F Control
1
：
Sensorless vector control
P0.01
Freq. control
channel selection
Range: 1
～
8
0
0: Analog potentiometer given on control panel
1
：
Control panel ▲ ▲, ▼ key given. Use ▲ ▲, ▼ key to set running frequency.
2
：
Control panel frequency digital setting. Use control panel to amend P0.02 parameter
(initial set freq.) to change set freq.
3
：
Terminal UP/DOWN digital setting. Use terminal UP/DOWN to amend P0.02 parameter
(initial set freq.) to change set freq.
4
：
Serial port digital setting. (Remote control mode) Set P0.02 parameter (initial set freq.) via serial
port.
5
：
VI analog given (VI-GND). Set freq. controlled by VI terminal analog input voltage. The
voltage range is DC 0~10V. The corresponding relationship between set freq. and VI input
voltage defined by function code P1.00~P1.05.
6
：
CI analog given (CI-GND). Set freq. controlled by CI terminal analog input voltage/current.
The input voltage range is DC 0~10V (JP3 jumper V), and the current range is DC 4~20mA
(JP3 jumper A). The corresponding relationship between set freq. and CI input defined by
function code P.1.06-P1.10
7
：
Pulse terminal given. Set freq. controlled by terminal pulse (The pulse signal only can be
input through X4 terminal.). The corresponding relationship between set freq. and input pulse
defined by function code P1.11-P1.15.